Видео


Pond Filter part 1



Home made koi pond filter. This is a home made filter I constructed using a 24" plastic flower pot , some PVC piping (3/4" for spray bar, 1" for drain/cleanout and 2" for return) Blue Bio balls, Bulkheads (3/4", 1" and 2") red buffing pads(coarse) and white (fine) for debri. 3/4" plywood for lid.

Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 125,971
Добавлено: 2 года
Длительность: 3:21
Комментарии: 44

Тэги для этого Видео:  



Найти больше видео в категории: "Entertainment"
Видео загрузил: PaulM708
Показать больше видео, загруженных PaulM708


Похожие видео:

DIY Koi Pond filter
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 9625
This is my bio filter which I have been experimenting with to improve it's ability to keep my pond clean.
HOW TO BUILD A POND - RAISED WOODEN PATIO POND CONSTRUCTION BY PONDGURU
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 120168
This video shows how to build a raised wooden patio fish pond and includes all the stages involved in making a raised wooden pond on an existing...
home made pond bio filter
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг
Просмотров: 231380
pond bio filter
my koi pond filter easy to maintain

Просмотров: 120642
if you wanna learned how to make one like this here some basic parts list.... my owned design this is 5 in 1 filter easy maintenance filter.. easy...
an explanation of how my filters work
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 210991
ive had lots of questions about these, so i decided to address them today. Q: how much did they cost you? A:$250, minus media. Q:were they hard...
Koi Pond Water Garden Spring Clean Out New Jersey
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 77034
Join Mike Gannon, the Pond Hunter, for a how to on giving your water garden pond a spring cleanout service. See the whole process and Mike offers...
Kaldnes DIY 5 Minute Bio Filter
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 66966
DIY bio filter for your fish pond, fish tanks or even your backyard fish farm and aquaponic systems You can buy this kaldnes type biomedia from...
The filter for a pond with sand
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг
Просмотров: 141186
Building An Inexpensive Trickle Filter
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 80033
How to build a very inexpensive, but very effective Trickle Filter for Koi ponds and water gardens.
Slow Sand Water Filter

Просмотров: 469297
Prototype unit I built to help me get a better feel for what kind of filtration rate (GPM/sq.ft.) I might expect to see on a larger system (think,...
DIY venturi, a few easy builds for aquaponics, aquaculture or hydroponics..
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 142628
I really like the idea of aerating the fish tank by venturi to save some coin & help make the system quieter.. A mate shared an idea with me for a...
DIY Pond - waterfall - filter build step by step for less than $400
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 241266
This is a step by step how to build a backyard above ground pond for less than $400 guide. It only took me a couple of days to build, it was really...
XTREME BIO FILTER - KOI FISH POND & WATER GARDEN
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 258836
Bio mechanical water filtration system for Koi, fish ponds, and water gardens. Simple to setup & run. Cleaning filter via backwash takes 5 minutes...
DIY Rain barrel made into pressurized homemade pond filter for water and algae ....
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 26290
How I constructed a pressure filter for my koi pond....Only time will tell if it works or not...I am running it in line with a UV filter powered by...
WOOD GOLD FISH POND
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 188746
How to make a aquaponic biofilter for 10 dollars from Missions of Love School of Aquaponics
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 109267
Making a Aquaponic filter is easy to make, this is how to do it, if you want written insructions email to ki4ngz@yahoo.com, yes it is Free.
Koi Pond Build.wmv
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 45206
Decided to build a new pond as the old one was small and hard to maintain. Took 4 months to complete and this is the end result, hope you like it....
home made pond skimmer update

Просмотров: 93105
my new update skimmer the previous video i have to maintain the water label...watch on full screen 1080p HD
DIY floating skimmer for a natural pool - organicpools.co.uk
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 52281
David Pagan Butler, organicpools.co.uk, shows how he made a circular floating pool skimmer for his swimming pond which is designed to take fine...
swimming pool fish farm filter
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 19208
how our swimming pool fish pond filter works
How to Build a Waterfall - Part 1
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 462300
Learn how to build a waterfall with our step by step instructional video. Building a waterfall can be easy after learning these "How to Build" tips...
Pond Filter Part 2 0001
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг
Просмотров: 37123
DIY how to build your own Bio Filter system for Kio pond
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 3887
Trickle bio-filter for koi ponds
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 26047
DIY Water gardening from Jason - After testing lots of different media filters for my various koi ponds, I've decided that this design is the...
Koi fish play in fish tank
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 312286

Комментарии:

Автор alpcats (27 дней)
Nice job on the discharge, very Grecian looking...

Автор PaulM708 (10 месяцев)
Thanks.

Автор PaulM708 (1 год)
Glad to see you used my idea and had a great success. Good luck and thanks
for the compliment.

Автор PaulM708 (1 год)
I actually do let the water run over into my flowers when ever I flush out
the pot. Thanks for the suggestion.

Автор PaulM708 (1 год)
I did have a huge problem with them at the beginig. This is why I leave the
pot uncovered. In my earlier videos i had made a top for the pot but when I
would remove the top to check the filter there would be tons of mosquitos.
Ouch! I realized that by leaving the top off the sun would beam on the pot
thus keeping them out. I also made sure there was plenty of movement in the
pot so the wate didn't appear stagment. I was considering the mosquito dunk
tablets for this summer. Just for precautions.

Автор Dessy Herliana (1 год)
please give me pic from u video...

Автор PaulM708 (2 года)
@c4prlm4st3r That's Greta. I'm glad you were able to use my idea. I think
the pot gives a good asttetics to the pond. Good luck. Post a video or send
me some pics.

Автор kurtcollier (1 год)
One of the best and most aesthetically bio filters I've seen.

Автор naturescaper (1 год)
Oh wow, yea I see what you mean! Out here in Oregon its mostly an issue
because it gets so cold, especially if installed away from any buildings or
residual heat, so they have to be built really well and pretty deep if
someone does want one. I have only built one in my 20 years building ponds/
landscaping and I didnt even get to do the filtration part of it, we just
did the shaping, excavating and some of the initial plumbing:-) Well, keep
beautifying the Bronx brother, I hope it catches on!!!

Автор PaulM708 (6 месяцев)
Thank you for viewing my videos and I'm glad you enjoyed them. Good luck on
you newest project, I'm sure it will be great. I have always felt that
having a pond on your property, especially with Koi is one of the most
beautiful and tranquil things one can do to just sit back and enjoy.

Автор PaulM708 (11 месяцев)
Thanks, check out my channel. There are a few more segments for this pond.

Автор PaulM708 (1 год)
Sorry for such a delayed response. I get so tied up with my job and other
hobbies that I tend to miss or overlook things that are important such as
your review/ comment. Thank you very much.

Автор PaulM708 (10 месяцев)
Thanks!

Автор shayden623 (1 год)
Do you have an issues with mosquitoes living or breeding in your filter?

Автор PaulM708 (1 год)
Thuank you very much for the compliment.

Автор PaulM708 (6 месяцев)
Jay Jay, Thanks. I made the spout out of 3/4 PVC tubing which I drilled 1/8
inch holes through both sides spacing them 1" apart. It is a very affective
spray bar. I did consider going smaller on the tubing but felt that the
pressure from the pump would create too much splash, thus losing a lot of
the water from the filter.

Автор PaulM708 (1 год)
Sorry for the delayed response but THANK YOU very much for the compliment.

Автор BUSTERDOG2000 (10 месяцев)
well done pal. nice and tidy

Автор Invisible (11 месяцев)
This looks cool, where is the other segment?

Автор RichyJam2011 (1 год)
Nice set up. I've been meaning to do something like this myself. thanks for
the inspiration :)

Автор PaulM708 (1 год)
Do you mean still photos? If so why? I have not uploaded any stills but you
can see different views of the pond and filter via my other videos.

Автор daya mcfarlane (1 год)
Hi. I followed the instructions posted in your video. I am so impressed
with the results that I had to drop you a quick 'thank you for posting'.
Great use of physics.

Автор Male Bee (1 год)
Use "DRAIN" Pipe to fertilize/water Flowers :)

Автор PaulM708 (1 год)
Hey Richard, I bought this platic pot about ten to fifteen years ago at the
Home Depot. Had it lying around and decided to experiment. You have to
check out HD, Lowes and even wallmart. Also try ebay. Good luck.

Автор PaulM708 (1 год)
When I first set up my pond (see my first videos) I purchased a Lifegard
Aquatics All In One Complete Pond Filter System. For Ponds or Water gardens
from 300 gallons up to 1500 gallons. I paid about 200.00 bucks. Since I've
set up my homemade filter I continue to use the pump and UV light that came
with the system. You could Google Lifegard Aquatics and click on the link
to get the specifics of the pump ect. But I will try to post it for you.

Автор PaulM708 (1 год)
Thanks for the kind words and looking at my video. There are a few more
with the completed filter in full working order. Feel free to view them.
Another thing, you may want to check out itqnguyen, He too was inspired by
my project and did one of his own based on my design.

Автор Judy White (6 месяцев)
My ex husband and son are in the process of building me a pond.I had 2
ponds at a prior home which was destroyed in the Alabama tornadoes two
years ago, so this will be a new beginning of sorts.We had trouble finding
rocks but finally found some exactly like what you have used.I can now
envision how my pond will look and your demo of the filter system also
helps so much.Thanks for sharing.

Автор stephan williams II (1 год)
How offen do you clean this fliter

Автор PaulM708 (1 год)
First off the pond is approximately 250 gallons. I have five goldfish and
twelve Koi. The water is crystal clear with minimal algae growth. I tend to
have to clean the filter more often than I'd like due to my wife over
feeding. She just can't get enough of watching them come up for food. This
was a last minute project last year and has so far been doing very well. I
am considering removing the preformed pond and going bigger with a vinyl
liner. Perhaps next year. Thanks for the comments.

Автор PaulM708 (1 год)
Thank you for the comment. I wish there were more pond busineses around
here also. I'm in the Bronx and have to shop on the net or go ouside of the
city to garden centers or pet shops. Besides a pond with koi in thr Bronx
is probably one of the rarest things in the city.

Автор Courtney C (11 месяцев)
Im not crafty in this manner at all maybe hubby can make it

Автор WithoutAtaste (1 год)
you have a really awesome pond and surrounding, that filter is genius!

Автор Haimish Chandra (1 год)
How many gallons is the pond? And how many fish do you have? Does it keep
the water clean? How is the algae growth? Love the design! And simplicity :)

Автор naturescaper (1 год)
Cool idea and nice job on it!!! I wish we had more Koi pond business around
here...

Автор PaulM708 (1 год)
I've been checking on the filter often and so far I've washed out the top
filter pad twice since the beginning of April. It was as simple as rinsing
the pad off with the hose and reinstalling it. If I eventually place a lid
on the pot I would probably prevent the heavy algea growth and then
wouldn't need to clean the pads as often. Usually once a month.

Автор rpniles (1 год)
Paul where did you buy your pot? Great video, you have got my interest in
making one for my pond. post an update if you can, thanks again, let me
know about where to buy a pot like yours. best regards, Richard

Автор Joni Summers (1 год)
What kind of pump are you using for your intake?

Автор PaulM708 (1 год)
Well I just checked the website and the pump model number is R440442 which
puts out 679 gph. Not to mention it is a very quiet pump.

Автор Jay Jay Believer 2-9 (9 месяцев)
How/ what did you make the spout out of?

Автор c4prlm4st3r (2 года)
hi paul.Using your idea for my koi pond. Different is, i am using clay pot.
Try to find the plastic pot for easy construction but they selling all pot
with drain hole at the bottom. Notice you pot do not have drain hole.For
filter media i just use aquarium filter pad coarse and fine. On top i put
some garden rock to make it stay apart. Work very well till now.

Автор PaulM708 (1 год)
Thank you for the kind words. Glad you liked my pond and my project filter.
It is winter now and still running strong. Haven't done any filter changes
yet all is well. Thanks again.

Автор 2019freddie (5 месяцев)
nice job buddy.

Вставка видео:

URL 
Ссылка 

Поиск Видео

Top Видео

Top 100 >>>

Видео

Seo анализ сайта