Видео


ATV Homemade Snowblower 12V electric CHUTE ROTATION



Ok I goggled all the info on making a Snowblower 12V electric CHUTE ROTATION.
I took the window and wiper motors out of a 4 door Buick and did a bench test on both, the wiper motor I could almost hold back with my fingers, so the electric window motor was the way to go its strong-fast- and Free and came with the door switch.It was also the easiest to take off the junk car. So go to your junk yard today!

Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 33,496
Добавлено: 5 лет
Длительность: 2:20
Комментарии: 25

Тэги для этого Видео:  



Найти больше видео в категории: "Autos"
Видео загрузил: drewme1010
Показать больше видео, загруженных drewme1010


Похожие видео:

Snow Thrower Upgrade
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг
Просмотров: 45345
I installed a cordless drill on my snow thrower (blower) to turn the chute.
HOME MADE ATV PLYWOOD 3/4 SNOW PLOW
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 47201
Custom snow plow construction
Homemade Single Stage Snowblower 4
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг
Просмотров: 15385
Top gear reverse run, stopped by a large stick. Fairly simple to build, approx $400 (not including shaft) but including welding supplies.
odśnieżarka stiga villa snow blower home made DIY Schneefräsen snöslunga souffleuse single stage
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 48819
Pług wirnikowy dmuchawa odśnieżarka jednostopniowa do kosiarki samojezdnej Stiga Villa Master wykonany ze sklejki i pokryty laminatem - samoróbka...
snowblower electric chute
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 6082
this is the electric chute control on my snowthrower i used a windshield wiper motor for the rotation and a linear actuator for the up and down of...
ATV Snowblowing ...
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 113989
Thanks large in part to my friend Lee, my ATV snowblower is really fun to use. We got about 8 inches of snow this morning and using it was a...
ATV snowblower
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг
Просмотров: 184643
A prototype snowblower.It is 1400 mm wide and its engine has 13HP, fits to all types of ATV(on video Outlander 650 max)
homebuilt custom snowblower
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 34865
this is a project I built from two 70s arien snowthros
yamaha grizzly with homemade snowblower
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 8151
Here is my yamaha grizzly that i attached a lawn tractor belt driven snowblower to and powered it with a 10 hp motor
~ RiPSaW ~ Motorized Bicycle
Рейтинг Рейтинг Рейтинг РейтингРейтинг
Просмотров: 20812
I'm in the process of building a kind a Ratrod/Evil/Phantom/Sunday driver looking motorized bicycle called ~~ RiPSaW ~~
Mini Truck Snow Blower Project Build - Mitsubishi MiniCab
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 66855
Video of motor testing on our 1995 Mitsubishi MiniCab mini truck Snow Blower build project. Visit Badgerland Mini Trucks & Equipment for more...
6.5 HP Harbor Freight Snow Blower Engine Swap on my MTD
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 22699
Swapped my 5 HP Tecumseh with a 6.5 HP Harbor Freight Lifan engine
Homemade Snowblower
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 16088
Homemade Snowblower
berco 2 stage snowblower electric chute and deflector kit
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 9037
Here is my video of my gt235 with my berco snowblower. The left/right of this kit is super slow, watch my other video for my upgrade.
ATV Snowthrower
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 16224
ATV Snowblower, snowthrower
MAKING a S10 CONVERTIBLE 4X4 BLAZER
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 23836
Took a 1989 Jimmy 4x4 S10 blazer and cut the full roof off it.,lifted it 3.5 ,31 tires,trimmed the fenders,blitz black paint job,with some urban...
ATV Snowblower
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 16928
Snowblower in action blowing some wet snow.
homemade atv snowblower
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг
Просмотров: 5739
Yamaha Grizzly with a snowblower off of a lawn tractor that I reinforced and mounted a ten horse briggs & stratton, this baby throws some snow.
PC120001.AVI
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 13996
ATV Snowblower 1st time out.
snowblower crank with home made universal.avi
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг
Просмотров: 11735
A crank has finally been made for turning the chute. A homemade universal joint has been made. This is trying it out.
Pług wirnikowy, homemade snowblower in Raków
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 70131
Proszę o ocenę i komentarze.
homemade atv snowplow
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 43917
homemade snowplow that my friend, his dad and i made. it is totally 100% stainless steel. the pictures are are bit dirty as i was just out riding...
ATV / UTV Snowblower
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 136268
With an ATV snowblower, clearing powder snow from your property will go so easily that the prospect will no longer make you dread the winter...
jody's snowblower
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 11805
Jody's homemade snowblower
Snow plow quad home made!!
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 121359
Snow plow Quad home made, montato su WT Motors Poseydon WT400 4x4.

Комментарии:

Автор Ronald Johnson (4 года)
My dad did this years ago when he first bought his Grazer with blower
attachment. Since he is held up inside a cabin he couldn't reach the
controls. He worked for Johnson Controls (GMC seat maker) and got a window
motors and seat control motors. He rotates the chute with the window motor
and elevation with the seat motor. He controls it with power seat switches
hehehe.

Автор Ronald Johnson (4 года)
TheSCryderman, there is no problem turning the shute while under load. Eh,
also, power comes from the cigarette lighter for simplicity. Just unplug it
when you take the blower off.

Автор drewme1010 (4 года)
U welcome

Автор drewme1010 (4 года)
is the chute made from plastic? metal? its a strong motor and it should.

Автор drewme1010 (4 года)
thanks

Автор djdave9979 (5 лет)
Nice job. I have a Lawn mower Snow blower as well, I'm gonna try the same
thing as you. Lookin for a little engine mnow. Nice to see someone else
through of this, and has it working.

Автор drewme1010 (4 года)
ty if you make one would love to see it.. hit me back when you do. D~

Автор limitup58 (4 года)
excellent job I want to build one of those also thanks for the video!

Автор drewme1010 (4 года)
ha i love the "beer chucker" keep the vids coming. The chute works great
watch my other vids and you can see it in action.

Автор drewme1010 (4 года)
Thanks yeah love making things myself. and saving lots of money

Автор SergeantTwiggs (4 года)
kick ass haha

Автор highmiler342 (4 года)
hey man.i've watched your vids on this build and all i can say is your the
man.

Автор bub549 (4 года)
hey...you think this type of motor would rotate a chute on a 5 foot blower
on the back of a tractor?

Автор drewme1010 (4 года)
Yes Thanks It works better then expected.

Автор TheSCryderman (4 года)
how does it work with a load of snow going thru, i just built a blower and
have not finalized the shute yet, do a search for 'the beer chucker' i have
3 other short videos on as well, still building

Автор Dennis Spottedwolf (5 лет)
Drew......nice dude but, I gotta see that bugger out in th' weather doin'
that snowtime thang..................

Автор drewme1010 (4 года)
Thanks.. haven't been on your youtube channel in a bit. I'll have to see if
you put any new songs on, Your a man of all trades

Автор mighty macca (4 года)
excellent job well done works a treat..

Автор drewme1010 (4 года)
Thanks

Автор drewme1010 (4 года)
thanks

Автор Garrett Jdbe (5 лет)
good job making it

Автор mcelrec (4 года)
Great idea ! lol Sickk

Автор drewme1010 (5 лет)
The gear was on the motor when you take them out of junk car doors. you
just weld a bolt to the gear then take the cut turn rod slip it in the bolt
and weld it up. The pulley is a 1/2. If you do a search on ebay for
(Electric Snowblower Chute) they sell-em for $270 BUCKS!
Thatwoudlbethedayipaythat

Автор djdave9979 (5 лет)
Where did you get the gear for the end of the motor to turn the shoot. Also
what size is the pully for the belt? half or 5/8's ? Thx

Автор mtdman11 (5 лет)
nice job man. came out real nice! i like the electric chute motor. homemade
is always better. you get way more pride out of buying anything. you should
check out my homemade snowplow for my quad.

Вставка видео:

URL 
Ссылка 

Поиск Видео

Top Видео

Top 100 >>>

Видео

Seo анализ сайта