Видео


HHO Generator How it's made Video #1



There it is, follow this link and please let me know if it was worth it: http://tinyurl.com/yga8jhy

Many of you has ask me for Blue Print and more detail on how I made it so I found this link where you can buy a very well done eBook including Videos, Complete Parts List, CAD blue print and more I just thought that I'll through the link on my videos it may help a few of you! Let me know!


Просмотров: 51742
Добавлено:
Длительность: 4:19
Комментарии: 9

Тэги для этого Видео:



Найти больше видео в категории: "2"
Видео загрузил:
Показать больше видео, загруженных


Комментарии:

Автор Banyan Theo ( назад)
I work whit NaOH and so far... no problem!

Автор crazychickenhead ( назад)
Is that foam hearty enough to hold up to NaOH or KOH electrolytes?

Автор Banyan Theo ( назад)
No this is not my first cell but it is my first Demo cell made out of
Acrylic. Thanks for your comment!

Автор Phillipscreates ( назад)
I agree, if she goes, its gone! Lots of gas in the cell. The foam looks
like a good idea to keep the bubbles down. Very clean build. Is this your
first cell?

Автор Banyan Theo ( назад)
No Mr.Z, they are connected in parallel. Sorry for my English, may be I
haven't been clear. Thanks for your time again.

Автор ZeroFossilFuel ( назад)
OH! There all connected in series? Never mind, then. Carry on. ;-)

Автор Banyan Theo (832 года назад)
But Mr.Z ... 5 volt to power a total of 12 plates is it going to be
sufficient? This will be .42 volt per plate. I remember you suggesting
between 1.5 and 2 volt per plate. You think that because my cell is divided
by 4 and plug in parallel I may be able to use lest Voltage is it right?
Interesting! But this is bringing a other question to me. How am I going to
bring down the power of my car from 12 to 5 volt? Well... I will first try
to find a computer PS. Thanks for your time Mr.Z!

Автор ZeroFossilFuel ( назад)
Very nice job. Just a comment. A box with such thin walls and so much
surface area will surely shatter into a thousand pieces long before the
gasses can escape through the blowout membrane. We did get a glimpse of the
3 plates. I presume 1 neutral in between two electrodes. Here's a hint:
Power it with 5V from a computer power supply and adjust your electrolyte
for the target amperage.

Автор m3sca1 ( назад)
nice job with the foam sponge drying the gas. to test if you have removed
all the electrolyte from the gas,you need to burn it. if you are using a
sodium salt electrolyte i.e.sodium hydroxide or baking soda you will get a
yellow flame if electrolyte ions are still present. if using potassium salt
you will get a bluish flame. a pure hydroxy flame will be hard to see.

Вставка видео:

URL 
Ссылка 

Поиск Видео

Top Видео

Top 100 >>>

Видео

Seo анализ сайта