Видео


30ft Tower Installation @ 9Y4NG - Arnold's Qth



Installing a 30 foot Rohn 25G tower at the qth of 9Y4NG-Arnold .... Installation is done without a gin pole , as the 10ft section is light ( pse think twice before installing this way ) ........ Cecil - 9Z4CLN is in the orange coverall , and Arnold - 9Y4NG is the videographer .

After receiving emails from guys who are not into installing towers, I must say -- YES that I do have 2 Gin Poles , I have been installing towers for yearssssss. I have the physical strength and a lot of learnt techniques for doing an installation this way ...... ROHN 25G sections are very light for me to manage this way by myself ......... I have installed a 50ft and a 40ft tower with this method..

If you must try this , practice on the ground with a 10ft section to get used to the sections weight .

Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 19,652
Добавлено: 3 года
Длительность: 6:46
Комментарии: 10

Тэги для этого Видео:  



Найти больше видео в категории: "Tech"
Видео загрузил: Leon S
Показать больше видео, загруженных Leon S


Похожие видео:

K5OCQ Tower Install
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 2970
Ever wondered how a radio tower gets put up? Well, it's just stacking one section of tower on top of another with the aid of a gin pole and someone...
PY5KD Tower Installation
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 9744
PY5KD Tower Installation (36 meters High) Tower By Torres Ouro Fino In The Video: PY5KD, PY5HSD and PU5RAS This tower will support two Stepp-Ir...
Part 2 - Installing an 80 ft. Bergey Excel 1 Guyed Tilt-up Tower
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 11256
Appalachian State University Wind Application Center presents step-by-step instructions for the assembly of the Bergey 80' guyed tilt-up tower....
Ham Radio Raising Tower
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг
Просмотров: 12184
My Rohn 25 G tower install
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 25073
I just installed another tower at the home QTH and decided to make a short video to post on youtube. Hope you enjoy!
IK2ZJR Traliccio con Antenna Mosley Pro 96 1°parte
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 31864
ik2zjr ha realizzato un sogno che aveva nel cassetto con una fantastica antenna Mosley Pro 96
Tower Raising Fail!
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг
Просмотров: 7566
This is a 32' wooden tower I made out of 2x4s. A gentleman I call Captain Kirk, an engineer, helped me with all the engineering type details. He...
Tower installation Part1
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг
Просмотров: 24555
Delhi 56ft tower picked up today!
Vertical Gin Pole- Wind Turbine Tower Raising System

Просмотров: 22014
Our manual tower raising system allows for a monopole tower to be raised and lowered without the hassle of guy wires, hydraulics, generators or a...
Tower installation part 2
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 22567
I dug holes 28" deep through soil and clay, then positioned concrete cylinders. Sequentially I then tapped each 3 foot long 3/4"-10 threaded dowel...
Beggining of winch pole setup for Rohn 25 Z tower on break over 1st video
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 12129
Completed project video showing it in operation here http://youtu.be/EDf9AAuRYOc Used my 2005 Polaris Sportsman 700 twin to lower my tower and...
Glenn Martin Hazer Winch Project
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 8859
After 5 years of cranking I decided to finally mount a low cost winch on the tower to lower and raise the VHF/UHF/Microwave antenna array. The...
Amateur Radio Tower Grounding.
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 32193
The primary rule for protecting ham radio equipment against lightning damage is connection of all elements to a SINGLE, low impedance grounding point.
The Radio Structures Amateur Radio Tower Is Delivered
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 27319
This is my new 18 m heavy duty radio structures amateur Tower that I purchased from Vinecom.co.uk. I will be putting my three element SteppIR on...
Raising the 72 Foot Vertical Antenna Mast at W5JGV - by myself!
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 47511
This is how I managed to raise my 72 foot tall vertical antenna by myself. The entire antenna and guy lines weighs about 110 pounds. It sits on a...
KD5OM's Backyard Tower Installation.
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 13590
KD5OM's backyard tower installation of the U.S. Tower MA-40.
Ham Radio Tower Installation
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 30050
Extra heavy duty 60 feet/18m, 2.5m2/32 sq ft wind load rating, aluminum self supporting motorized crank up/tilt over tower. This will carry a HF...
Amateur Radio Tower Raised in Under 45 Seconds!
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 27559
Testing my ham radio tower and new winch before installing any antenna. I hired a welder to build the tower stand for me. I poured the concrete...
First attempt at a very difficullt tower erection.
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 20312
Attempting to erect a self supporting tower at a wind farm in Maui with a helicopter on a very windy day. Back to the drawing board.
Gin Pole
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 13169
WLRN Miami, Lifting a 100' Gin pole, In real time. In preparation of HDTV antenna installation. Jump to 1000' AGL
Part 1: Installing a Ham Radio Tower - Getting the Tower
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг
Просмотров: 56315
Covers the installation of a 55' US Tower HDX-555
Tower pre-installation part 1
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 28539
I got this tower from a fellow ham radio club member who got it from a CB'er. All I had to do was donate $100 to the club treasury and it was all...
Camp radio tower grounding.mpg
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 54071
Adding the grounding system for the 100 foot tower. This tower will be used for a two meeter repeater at the camp. 147.390
Building of the Heights tower
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 43316
Video of the construction of my tower and antenna. Heights 76' aluminum tiltover tower with a Dayton electric motor. JoGunn 8 eleament beem.
Lowering The Tower
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 11214

Комментарии:

Автор joseph chrzempiec (4 месяца)
awesome video but why does the guy look like hes from a prison in that
orange jump suit LOL just kidding.

Автор The Erod1944 Channel (1 месяц)
My complements to the "groundsman" who was pitching hammers & parts up the
tower. Your arm is worthy of Olympic Competition.

Автор joseph chrzempiec (4 месяца)
I'm only kidding i give props to guys who makes towers and climb them.

Автор Randy A (1 год)
Now dat was scary!!

Автор TheHamshack (2 года)
Nice video nice antenna setup there by the looks of it.. great stuff..James
G0SEC

Автор Welingtom Duarte (1 год)
cheio das antenas ae manow!!!

Автор Michael Thompson (3 года)
leon what happen with a gin pole...thats dangerous what ya doing there
man....the section may be light but a ginpole would be the way to go..I was
nervous watching this video Mike C6ANX

Автор Idowhatiwhant (1 год)
Do you need a permit to put a tower up even if its just a 20 foot or 25
Foot

Автор ochgottnochma (3 года)
why dont connect it at bottom?

Автор Ken Arjoon (3 года)
Good job guys as always, Leon you and Cecil makes a good team as usual,
Cecil and his rigging experiences from trinmar and you your experiences
over the years, nothing can beat experience!! Anyways guys keep up the good
work. Just one word of advice regarding OSHA..... PPE GUYS! 9Z4KA

Вставка видео:

URL 
Ссылка 

Поиск Видео

Top Видео

Top 100 >>>

Видео

Seo анализ сайта