Видео


Tesla Turbine water pump



Tesla pump powered by a 1/3hp die grinder at 90psi working pressure. 9 disks 1.5" diameter. I am using the air grinder to power the pump. This is just a water pump, not free energy or anything special. This is a proof of concept that a flat disk can move a fluid very efficiently. I now use variable electric motors to power the pumps. Check my channel for more pump demos.

Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 189,517
Добавлено: 7 лет
Длительность: 7:02
Комментарии: 92

Тэги для этого Видео:  



Найти больше видео в категории: "Howto"
Видео загрузил: tinkerman01
Показать больше видео, загруженных tinkerman01


Похожие видео:

DIY Tesla Turbine Video 1
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 174056
This is video 1 in a series of videos which will show how to build your own Tesla Turbine for fun and experimentation. Many operational...
Teslajet turbine 1kW Home power.wmv
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 480671
Tesla Turbine (Teslajet) with modified rotors generating approx 1kW shaft power for home off grid power generation with alternative green fuel...
The Making of the Tesla CD Turbine Prototype
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 382227
Help us caption and translate this video on Amara.org: http://www.amara.org/en/v/B07z/ The Making of the Tesla CD Turbine Prototype is the story...
Tesla Turbine Concepts Explained
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 191432
Tesla Turbine concepts xplained. more info @: http://heavym3tal.googlepages.com/physics576
1998 Chevy Tahoe 5.7L Water Pump Replacement (Part 1) -EricTheCarGuy
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 77187
Visit me at: http://www.ericthecarguy.com/ This video is part 1 of the replacement of a water pump on a 5.7L Chevy V8. This video will apply to...
Tesla Turbine from Hard Drive Platters for electrical power generation energy free hack
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 285159
This Tesla concept turbine option utilizes ten hard drive platters from a 1990 harddrive. It makes a great free hack disk part for a Tesla Turbine....
CD TESLA TURBINE 2 VLOG MAKE A TESLA TURBINE OUT OF CD DVD
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 127930
MAKE A TESLA TURBINE CD. http://www.greenpowerscience.com/
Tesla Water Turbine
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг
Просмотров: 3576980
1100 rpm, high torque, water gives up its energy efficiently.
How to Make a "Water Ram" off-grid Water Pump, requires no electricity
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 15730
This is how to build a Water Ram water pump from easy to find parts at any local hardware store. The Water Ram can pump water uphill hundreds of...
The Tesla Turbine & How it works
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 450083
http://www.epicphysics.com/model-engine-kits/tesla-turbine-kit/ The Tesla Turbine & How it works
Tesla turbine. Test 2

Просмотров: 233853
Another test with better blade spacing and air flow in the input. But there is still much to do to get the best out of it.
Magnetic Tesla Turbine Generator
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 100177
Free energy from a garden hose! Test run of a Magnetic Tesla Turbine Generator, rotating at 2500 RPM on 35 psi faucet water pressure. This is the...
Williamson ram pump
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 603708
Updated video at http://www.youtube.com/watch?v=y1Z-idnIM6M A very simple but effective water pump that uses the energy of a large amount of water...
Replacing your Water Pump
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 86980
Anthony @ DIYautotech taking you through the steps on how to: 1. Notice a problem, narrow down to a component, test component, replace. 2. Replace...
Tesla Turbine With Magnetic Bearings II
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 480595
Another little Tesla Turbine using magnetic bearings and driving a genrator off the floating shaft.
DIY Relace Water Pump Pressure Switch - Repair
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 90472
How to change a water pump pressure switch. This water pressure switch is what turns on and turns off a water pump based on the outlet water...
Tesla CD Turbine II With Hi-Speed Disc Pack
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг
Просмотров: 398628
Help us caption and translate this video on Amara.org: http://www.amara.org/en/v/B07V/ First live action run of the Tesla CD Turbine II with...
Tesla Turbine ( Carbon Fibre Disks)
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 262420
This is a modified tesla turbine from gyroscope.com. It has be upgraded with carbon fiber / fibre discs and ceramic bearings.
Pelton water turbine, 715 kVA
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 147055
Our Website!- http://adf.ly/N3Obk This is a new water turbine in Iceland. Árteigsvirkjun. 420 V, Frequency- 50.00 Hz 715-kw Would power about...
NEW Tesla turbine with improvements - from gyroscope.com
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 299864
NEW Tesla turbine with improvements. Still based on teslas bladeless turbine.
Simple Homemade Water Pump Demonstration.
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 492881
This simple homemade water pump demonstration uses a low power air pump to pump water. Build your own high performance grow containers, pumps,...
CD TESLA TURBINE MAKE A TESLA TURBINE OUT OF CD DVD platters for free energy турбина тесла
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 211448
MAKE A TESLA TURBINE BLADE OUT OF COMPACT DISKS or DVD for free energy devices. турбина тесла or турбіна тесли http://www.greenpowerscience.com/
Free energy! Super-economical water pump!
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 675154
We are offering a super-economical pomp, which functions without electricity and fuel. The given installation is invented in Moldova by the author...
Tesla Turbine 10 kW Final Test, 70 PSI, 850 RPM
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 217189
Tesla Turbine 10 kW Final Test, 70 PSI, 850 RPM
Water Pump Fail - EricTheCarGuy
Рейтинг Рейтинг Рейтинг Рейтинг Рейтинг 
Просмотров: 168551
Water Pump Fail - EricTheCarGuy http://www.ericthecarguy.com/ This one is a continuation of the cooling system overheat video, here is a link...

Комментарии:

Автор Kevin black (4 месяца)
how may rpms way it spinning to make the 20 pis?

Автор Micheal Lamb (5 месяцев)
If you want to get the plans
To build the Tesla free Energy Generator
Go to Google and search for:
*Tesla Generator Info*
Click the First Result

Автор breatheasy06 (6 месяцев)
Very very nice work!! Why have you stopped your experiments?

Автор JACK23352335 (6 лет)
this pump is only good for a water mover, what kind of suction/lift in ft
is it capable of if any. also the die grinder spins at 10000-15000 rpm,
what if you slow it down to 1500 rpm?

Автор tinkerman01 (6 лет)
Free energy? No "free" energy. A Tesla style pump can be used in any
application where a pump needs to be used.

Автор therealcedz (4 года)
@BrentsPhotos lol nice try.

Автор restlesscrow (5 лет)
Have you considered building a bigger one? I'm very interested, and I have
a particular use that would be considered very unconventional....

Автор tinkerman01 (6 лет)
Not sure if anyone is selling tesla pumps. Run a search on tesla turbine
there is some information out there. Try Tesla Engine Builders Association.

Автор ilija1969 (4 года)
Nice work ! Do you have blueprints available ?

Автор KrimReefa (6 лет)
lol as I was watching I was thinking imma ask him if I can buy one then
look down and people are doing the same. Nikola Tesla was/is the man and I
love his work. How much for 2 man ? I will message you ;)

Автор tinkerman01 (6 лет)
This pump will pump water or oil, just about anything. I have been pumping
30w oil up a 1inch pipe about three feet with no problem. Doesn't like the
slower rpms but still pumps. Keep in mind that its only a 1.5inch disk.

Автор Frank Germano (4 года)
Nice job. Very well done!

Автор AB12AC321 (6 лет)
Could you use this to pump motor oil into the crankcase?

Автор walkertongdee (6 лет)
Hey what a highly machined device. It shows your skill and inteligence.
Good job dont listen to those other posts from people who couldent build a
life for themsels but get off on trashing others achievments.

Автор MsHojat (4 года)
This looks like expensive machined parts. If you made this, what
modifications did you need to do, and which parts? I'm also curious as to
what the advantages and disadvantages of this device is. I've never heard
of this type of displacer in my 3 years of college, and year of work in
sanitary food processing industry. I can only assume it's just a sort of
novelty/hobby thing as opposed to practical.

Автор youtuubbguy66 (6 лет)
Nice pump. I Wish I could buy one exactly like that. It really look
powerful. Adding a second output increased the performance... how much
output can you add before the performance start decreasing?

Автор tinkerman01 (6 лет)
Thanks, I have already looked at a turbo housing. It will not work because
it spirals to a thinner deapth. My next build will be with a precast
waterpump housing that flows 50gpm with the stock impeller. Can't wait till
I get my 22 disk pack installed!

Автор tinkerman01 (5 лет)
Yes, The bearings are sealed no water or fluid can inter into the bearing
section.

Автор henrjohw (5 лет)
Cool!!!

Автор teslstirlputt (5 лет)
High quality work and great results. I made a Tesla turbine from machhined
aluminum several years ago, but was interested in air compression. Couldn't
find a motor fast enough to spin it for good results. Mine was over 2" dia.
-- probably too big, and I didn't think of driving it with an airmotor like
you did. Great job! Makes me want to start experimenting with mine again.

Автор T33V33 (4 года)
They need to marry a Tesla Turbine with Kevin Costner's oil extractor.
Nikola Tesla: that man's brains still haunting us even today. (Thankfully)

Автор tinkerman01 (2 года)
@johnshepherd2011 The disks and spacers and individually stacked on a
shaft that runs the same size throughout the assembly. The disks start at a
locking collar midways on the shaft inside the housing. The shaft has been
thread at the end to secure the disks and spacers.

Автор tinkerman01 (5 лет)
Yes if using compressed air you increase the number of nozzles it would
increase the torque at the shaft. The max RPM would be determined by the
nozzle velocity. Secondly, I am not sure at what point you max out flow
from the number of ports. I have thought about a 4 port design just for
giggles. Its not as much about the number of ports as it is the cross
sectional area that the water has to flow from.

Автор drinkmoresoda (3 года)
i have a quarter inch shaft huh huh huh ha

Автор mYOzZyKaT (6 лет)
Its looks real good and I realy like that you have build it your self. But
your time measurements are way of. The second 5 gallon test with the dual
port is also 35 seconds - NOT 20..

Автор Conner Shaw (6 лет)
Question, you show that the pressure reaches 20 psi when there is one port
on the housing... what pressures are aquired with when the second port is
added? it obviously increases the flow but i'm just wondering how much
pressure is in each of the two lines. thanks

Автор tinkerman01 (5 лет)
"Now seriously, how does it actually work" You might want to read about how
a centrifugal pump works before you post comments like this. I'm using the
die grinder to turn the disks that are connected to a shaft that is
connected to the die grinder. There is no secret here!

Автор NRITV New Jersey (6 лет)
Where can I buy one of these pumps? Do you have a web address where someone
is selling these units or at elast the designs?

Автор jhwtech (6 лет)
bigger is better. I would give what ever is fair for your time and
experience. How big is your next one going to be? any plans on building one
with 9 3/4 in disc like tesla's was? if so I have some titaniam discs on
order. The housing would still need to be built along with the shaft and
bearings.

Автор lorenzofarias317 (3 года)
I saw a lot of Tesla's turbine but I never saw one applicated. I would like
to see one working like a motor, may be in a bike, a motorcycle or in a
boat.

Автор tinkerman01 (3 года)
@St0RM33 This was my very first pump. The other update is the current
design. The thinner the disk the more you can get in the housing. If you
have any experience with a lathe you can make one. Nozzle design is
determined by your application. Not sure what you need to research, I just
applied my common knowledge with some trial and error. If you only need
10psi using 500rpm maybe this pump isn't for you. Maybe research other pump
designs like gear or conventional pumps.

Автор x65535x (4 года)
@chaz706 I was suggesting that he make a pneumatic water pump, I do like
this design over a lot of the polycarbonate or acrylic ones I've seen. It's
fairly well made.

Автор jhwtech (6 лет)
Thanks for the quick responce

Автор TheSchetsofiel69 (4 года)
And supply it with 12volt offcourse.

Автор tinkerman01 (4 года)
@maffew286 I now use a rotozip tool which gives me a good variable speed
for tests

Автор JEHERETIC (4 года)
nice!

Автор roguesqadronairsoft (4 года)
no meaning to be a troll but people streotypicaly with southern accents
probilly don't even know who tesla was or let alone a turbine again i not
saying this to bash you :)

Автор essence324 (5 лет)
better run with air i guess

Автор seymour333 (6 лет)
very compelling, nice job

Автор EshenbaughRacing (4 года)
is this really your hobby? you know you can buy a water pump at home depot
and pump water in front of your house into buckets all day with 12v!

Автор FoZZy1300 (5 лет)
beautiful work, i wish i could buld something that nice and clean looking..

Автор tinkerman01 (3 года)
This is designed as a pump not a turbine.

Автор superfunnyman123 (5 лет)
were did u get the disks?

Автор jhwtech (6 лет)
hello tinkerman01, Is it possible to get 100 psi and if so what would I
need to do How do I get more psi? Do I need a bigger pump or more
Horsepower? Thanks

Автор St0RM33 (3 года)
@tinkerman01 thanks. I will have about 0.8Kw of input power, so i it would
be more than enough for my application. Though it's just a fun project, not
something that i would use constantly. It is just the only motor i have in
my hands so i'll have to use a gearbox to make it work;p

Автор saiello2061 (6 лет)
Most impressive display of a tesla turbine on YouTube.. ;o) How would a
'multiport' outlet or even no ports, just a large 'snail' type outlet
housing so that there is no restriction perform..? Actually, why not get a
turbocharger and replace the compressor wheel with a Tesla type?

Автор tinkerman01 (6 лет)
yes it will self prime. Mostly depends on how far it has to pull from
before it reaches the pump. If it's over a couple feet I use a check valve.

Автор tlacua28 (6 лет)
I will like to know if this pump its self priming it means once you start
running it will pull the fluid to be pumped

Автор tinkerman01 (6 лет)
Well sir, I'm not sure if my design would ever make 100psi. It would need
much better seals and much closer tolerances. Is it possible? I don't know.
Can it make more than 20psi? I'm most sure. I have not done any testing
over 20psi do to seal failure.

Автор tinkerman01 (3 года)
@St0RM33This style pump really likes the high rpm, it preforms best the
faster it spins,there is stalling out like a vane style pump. The testing
with the 1.5inch model using water resulted the best pressure to rpm factor
using a .020 disk spacing. The input rpm varied up to 19,000. The pump did
not like rpm under 5k,but my 3.5 model runs at 3500. You will need more rpm
for a smaller disk. Input diameter needs to be close to 50% of the disk
dia. Make large ports that stay within the input dia.

Вставка видео:

URL 
Ссылка 

Поиск Видео

Top Видео

Top 100 >>>

Видео

Seo анализ сайта